Blog
Blog & Technical Guides
Practical advice on expansion joints, seismic joints and waterproofing from our engineers and site teams.
- Expansion Joint Installation: A Step-by-Step Guide for Site EngineersA good joint system can still fail if it’s installed badly. This is the method our own teams follow on site, and the mistakes we see most often.
- Aluminium vs SS 304 Expansion Joint Covers: Which Should You Use?Both materials work well, and the right one depends on where the joint is and what crosses it. Here’s how we help clients decide.
- Why an EPDM Water Barrier Is Essential in Roof and Floor Expansion JointsMany leaks in new buildings come from expansion joints that were covered but never sealed. An EPDM barrier under the cover stops them.
- Seismic Joint vs Expansion Joint: What’s the Difference?They look similar on drawings, but a seismic joint has to survive far bigger, faster movement than a normal expansion joint. Here’s what changes.
- How to Choose the Right Expansion Joint Cover for Your Gap Size (25 mm to 500 mm)Joint width, location and load decide which cover you need. Use this quick guide to match the gap on your drawing to the right floor, wall or roof system.
- What Is an Expansion Joint – and Why Every Large Building Needs OneEvery large building moves a little every day. An expansion joint is the planned gap that lets it move without cracking. Here’s how it works and why the cover matters.
Have a question we haven’t covered?
Send us your joint details and we’ll answer it, usually the same day.