Roof expansion joint with EPDM water barrier by Sara Enterprises

Why an EPDM Water Barrier Is Essential in Roof and Floor Expansion Joints

It’s a common story in new buildings. A year or two after handover, damp shows up on a ceiling or a wall right under a straight line on the floor or roof above. That line is usually an expansion joint that has a cover plate but no water barrier.

A cover plate alone is not waterproof

Metal cover plates are fixed to one side and slide on the other so the joint can move. That sliding edge can never be fully sealed with sealant alone, because the sealant tears as soon as the building moves. Water gets past the plate and runs straight down the gap.

What EPDM does

EPDM is a synthetic rubber that stays flexible from extreme cold to over 100 °C and resists UV and ozone. In our systems we install a 1–1.2 mm EPDM membrane as a loop or “U” inside the gap, bonded to both edges with epoxy. The building can open and close the gap, but water caught by the membrane is carried along the joint, not into the room below.

EPDM water barrier being installed in a roof expansion joint
EPDM barrier going into a roof joint before the aluminium cover is fitted

How we install a roof joint

  1. Clean the gap and check it is even and straight
  2. Grind both concrete edges and remove all dust
  3. Apply mixed Mapei Adesilex (A + B) epoxy to both edges
  4. Press the EPDM barrier into the epoxy, overlapping 25 mm at every joint
  5. Apply a second coat of epoxy over the EPDM edges
  6. Fix the aluminium L-profiles on both sides with anchors every 400 mm
  7. Lay the screed or concrete up to the profiles
  8. Fit the top cover plate and tighten it with SS screws

Good EPDM checklist

  • Thickness of at least 1 mm; we use 1–1.2 mm
  • Conforms to ASTM D2240 hardness and ASTM G53 weathering
  • Bonded with epoxy, not just mechanically fixed
  • Laps of at least 25 mm, sealed, with no gaps at corners

Need help choosing a joint for your project? Send us the joint width and location or call +91 98187 49056. We usually reply with a recommendation the same day.

Share this guide:WhatsAppLinkedInFacebookX

Leave a Comment

Your email address will not be published. Required fields are marked *